Hp Smart Printer Scan Aligment Page Again

Z7_3054ICK0KGTE30AQO5O3KA30N0

hp-concentra-wrapper-portlet

Actions

HP Printers - An Alignment Folio Prints after Every Power Upward or Impress Job

This document is for HP inkjet printers.

An ink cartridge alignment page prints every time you start a impress job or turn on your printer. This issue usually occurs when a cartridge is replaced and the alignment procedure is not completed.

Step 1: Complete the alignment process

Make sure the alignment process is complete before using your printer.

1. Load obviously white paper in the input tray.

2. Adjust the paper width guides until they residuum against the edges of the paper.

3. Print an alignment page.

   • Printer control console (printers with command console menus): Open the Tools or Printer Maintenance menu, and then select the option to Align cartridges, Align printhead, or Impress an Alignment Page.

   • HP Smart app (Windows x, macOS, Android, iOS): In the app, select your printer, click Print Quality Tools, and then select the option to align the printheads or cartridges.

   • HP Printer Assistant (Windows): Click Maintain Your Printer, so select the choice to align the printheads or cartridges.

   • HP Utility (Mac): Click the option to align the printheads or cartridges.

   • HP Solution Center (Windows XP, Vista): Click Settings, and then click Printer Toolbox. On the Device Services tab, click Align the Impress Cartridges to impress an alignment folio. If prompted on the printer command panel, software, or alignment page, scan the alignment page to consummate the alignment.

4. If your printer has a scanner, follow the directions on the alignment page to scan information technology and consummate the alignment.

5. Restart your printer or transport another print job.

If the issue persists, go along to the side by side stride.

Step 2: Check the cartridges

Remove, inspect, and reseat the cartridges to make sure they are correctly installed.

1. Open up the ink cartridge admission door. Depending on your printer model, the door might exist on the front end or the top of the printer.

2. Wait for the carriage to terminate moving.

   caution:

   If you are unable to admission the cartridges, do not attempt to move the carriage. Skip to the Reset the printer step.

3. Remove the cartridges.

   caution:

   Practice not touch the copper-colored contacts or nozzles. Touching these parts might upshot in clogs, ink failure, and bad electrical connections.

   

4. Check the cartridges for debris, and then make certain the nozzles and electrical contacts are not covered by protective tape.

5. Reinsert the cartridges in the right slots.

6. Close the ink cartridge access door.

7. Wait until the alignment page prints, and then follow any prompts to scan it and consummate the alignment process.

8. Restart your printer or send another print job.

If the effect persists, continue to the next step.

Footstep 3: Bank check the alignment page

Alignment might fail due to defects on the alignment page. Check the page for defects, such as missing colors or sections.

annotation:

Depending on your printer, the alignment page might have multiple colors or only blackness ink. About alignment pages include a serial of lines and blocks.

Example of an alignment folio without defects

• If you notice any defects, continue to the side by side footstep.

Stride four: Clean the printheads

Use a printhead cleaning tool to aid prevent streaks, smudges, or lines that can interfere with the alignment process.

1. Run the printhead cleaning tool.

   notation:

   You might need to clean the printheads more than once.

   • Printer command panel (printers with control panel menus): From the Settings, Setup, or Tools menu, select the selection to clean the printheads.

   • HP Smart app (Windows 10, macOS, Android, iOS): In the app, click your printer, click Print Quality Tools, and and then select the pick to clean the printheads.

   • HP Printer Banana (Windows): Click Maintain Your Printer, and then select the option to clean the printheads.

   • HP Utility (Mac): Click the option to clean the printheads.

2. Evaluate the printout.

   • If whatsoever defects remain, replace the printheads. For instructions, go to HP Customer Support, blazon your printer model, and so search for a 'Replacing Printheads' document.

   • If no defects remain, print another alignment page, and then follow any prompts to scan it and consummate the alignment process.

3. Restart your printer or transport another print job.

If the issue persists, continue to the adjacent step.

Step 6: Replace the cartridges

Faulty or damaged cartridges in your printer can cause errors. Replace all ink cartridges.

note:

If you remove and reinstall the same cartridge, the product does not realign. The production remembers the alignment values for each cartridge.

1. Open the ink cartridge admission door, then wait for the carriage to finish moving.

2. Remove the former cartridges from the printer.

3. Remove the new cartridges from their packaging, and then remove any protective tape or plastic.

   caution:

   Do not touch the copper-colored contacts or nozzles. Touching these parts might upshot in clogs, ink failure, and bad electrical connections.

   

4. Insert the new cartridges, and then close the ink cartridge access door.

5. Await until the alignment page prints, and then follow any prompts to scan it and complete the alignment process.

6. Restart your printer or ship another print job.

If effect prints, keep to the next step.

Footstep 7: Reset the printer

Resetting the printer can resolve some errors.

1. With the printer turned on, disconnect the power cord from the printer.

2. Unplug the power cord from the power source.

3. Wait 60 seconds.

4. Reconnect the ability cord to a wall outlet and to the printer.

   note:

   HP recommends plugging the printer straight into a wall outlet.

Restart your printer or transport some other print job. If issue prints, continue to the next step.

Step eight: Service the printer

Service or replace your HP product if the issue persists later on completing all the preceding steps.

Become to Contact HP Customer Support to schedule a product repair or replacement. If y'all are in Asia Pacific, you will be directed to a local service heart in your area.

To confirm your warranty status, go to HP Production Warranty Bank check. Repair fees might utilise for out-of-warranty products.

perezwhisair1941.blogspot.com

Source: https://support.hp.com/id-en/document/c00473766

Share this post